Fiberglass Chopped Strand Mat
Alkali-free chopped strand mat
Glass fiber chopped strand mat, also known as gauze mat, is a mat-like object formed by cutting the yarn strands with a diameter of 12 μm monofilament fibers into 5 cm lengths, which are not oriented but evenly distributed on a flat surface, and are combined with an adhesive. . Taiwan glass powder glue type glass fiber strand mat is bonded with powder adhesive.
characteristic:
Consistency and non-directionality.
The mechanical properties of the laminate are slightly isotropic.
The resin content can be higher and the water tightness is better.
Good bonding between impregnation and lamination.
When the laminate is damaged due to discontinuous yarn strands, the damaged area is reduced.
The surface effect of the laminate is good.
Latex type: strong surface, can improve the environmental conditions of factories and personnel
Powder glue type: The laminate has better transparency.
Applications:
product | Product Features | Applicable resin | Product example |
Powder type | Good impregnation, good transparency of laminates | polyester resin / vinyl ester resin | Car body, hull, tank basin, water tank, wave board |
Latex type*1 | Strong surface, can improve the environmental conditions of the factory |
*1 Latex type can produce hard, normal, soft
Object specification range:
Product | Basis weight *1 (Specification median ± tolerance) (g/m2) | Loss on ignition (%) | Moisture (% max) |
80P | 80 ± 8 | 14.0 ± 4.0 | < 0.20 |
90P | 90 ± 9 | 12.0 ± 4.0 | |
100P | 100 ± 10 | 9.0 ± 4.0 | |
110P | 110 ± 11 | ||
150P | 150 ± 15 | ||
230P | 230 ± 23 | 5.0 ± 2.0 | |
270P | 270 ± 27 | 5.0 ± 2.0 | |
300P | 300 ± 30 | 4.5 ± 1.8 | |
450P | 450 ± 45 | 3.0 ± 1.2 | |
600P | 600 ± 60 | ||
100E | 100 ± 10 | 6.0 ± 4.0 | |
110E | 110 ± 11 | ||
150E | 150 ± 15 | ||
230E | 230 ± 23 | 5.0 ± 2.0 | |
270E | 270 ± 27 | 4.5 ± 1.2 | |
300E | 300 ± 30 | 4.2 ± 1.2 | |
450E | 450 ± 45 | 4.0 ± 1.2 | |
600E | 600 ± 60 | 3.5 ± 0.9 |
*1 Product range: Basis weight 70 g/m2~ 900 g/m2 Width 200mm~2600mm
product | 1040mm 宽 | |
Length (M/ROLL) | Weight (KG/ROLL) | |
230P/E | 125 | 30 |
270P/E | 107 | |
300P/E | 96 | |
450P/E | 64 | |
600P/E | 48 | |
Packing:
Width(mm) | Carton / Pallet*1 | L x W x H (mm) carton size L x W x H (mm) | L x W x H (mm) Package size*2 L x W x H (mm) |
1040 | 12 | 1100 x 275 x 275 | 1140 x 1140 x 945 |
16 | 1140 x 1140 x 1220 |
Storage conditions:
Store the strand mat in a cool, dry place. Suitable temperature: 21±11 ℃, humidity: 60±20% (recommended to control the temperature not more than 35 ℃ and humidity below 75%). It is also recommended to leave this product in the workplace for at least 24 hours before use (do not open the package until before use). Do not stack more than 2 layers of pallets.
Application performance:
Glass fiber is inorganic fiber, never burns, has good electrical insulation properties, high tensile strength and dimensional stability, weather resistance and corrosion resistance. Fiberglass is a good reinforcing material, and has the advantages of low cost and high strength/weight ratio compared with aluminum or metal products.
Fiberglass strand mats are suitable for manual coating methods to produce large-volume, or non-mass-produced or smooth-surfaced products.
Such as: flat plate, wave board, hull, car body, bathtub, box basin, sink, table and chair, etc. Widely used in transportation,
Aerospace, shipbuilding, residential and construction, industrial and public works, sports and leisure and other fields.
